Instructions For PedEgg Use

July 4, 2008 – 5:42 pm
Before your first usage you are going to want to open up the pedegg by pulling apart the top and bottom covers of it. attach the precision stainless steel microfiles by snapping them into place like the directions tell you to do. Before every use you need to make sure you are only using the pedegg on very clean and dry skin, moisture free is also a big must. You need to make sure that the pedegg is clean and dry and empty of all the old shavings from previous usage. Make sure to read all the instructions each time before use as well.
To Use the Pedegg you are going to first remove the bottom protective covering to expose the metal filing surface. It'll look absolutely stunning, keep the top cover on to collect all the new shavings you will be getting. 2nd you are going to hold the pedegg securly in the palm of your hand, applying gentle pressure throughout the skin area that is going to be treated. Usually your best bet is to start at the thickest area of that dead skin you will be wanting to remove, and slide the pedegg slowly back and forth.  The third step is to make sure you are working in a very slow manneer, stopping intermittently to check for the results you so desire. Add a slight ammount of more pressure to remove the thicker areas of skin. Do not ever rush and make sure you are often stopping to check the results. If your skin becomes irritated you need to stop at once. The 4th step is once you have reached your goal of the pedegg, you need to remove the top cover of the pedegg and empty all the shavings into the trash.
After pedegg usage you are going to want to wash the top cover and microfiles with very hot and a mild type of soap, then rinse and dry thoroughly using either a hair dryer or air drying works as well. Clean the bottom cover area with a damp cloth and then put both of the pedegg covers back on, lastly make sure your storing location is out of reach of children or other animals.

Post a Comment